Electrical Specifications Parameter Minimum Typical Maximum Units Vcc Range 4.75 5.25 V Supply Current @ 5V (Output Low) No Load 30 mA VOH see note 3 VOL @ 16mA (Vcc = 4.75V) 290 700 mV Pull-Up Resistor (Internal) 7.5 10.5 13.5 KOhm Output Rise Time (CL-15pF) 500 nS Output Fall Time (CL-15pF) 14 nS Output: 2-bit gray code, Channel A leads Channel B by 90° with clockwise rotation
Environmental Specifications Parameter Minimum Typical Maximum Units Operating Temperature: Vcc = 5V -40 25 85 °C Storage Temperature Range: -55°C to +105°C, per MIL STD 202F Method 107 Test Condition A Humidity: 85% R.H. @ 40°C, 240 hours, per MIL STD 103B Test Condition A
Mechanical Specifications Vibration: Harmonic motion with amplitude of 15g, varied from 10 to 2000 Hz for 12 hours, per MIL STD 204 Test Method B Shock: 100g for 6 ms half sine wave with velocity change of 12.3 ft/s, per MIL STD 213 Test Condition C Rotational Torque: Sleeve bearing: < 1 in. oz. max., Ball bearing: < .25 in. oz. max., higher for sealed unit. Operating Speed: Sleeve bearing: 200 RPM max., Ball bearing: 3,000 RPM max. Shaft Push In Force: 50 Ibs. max. Shaft Pull Out Force: 25 Ibs. max. Bushing Mounting Torque: 10 in. Ib. max Terminal Strength: 3 Ibs. max. applied perpendicular to the terminals Rotational Speed, Rotational Life and Shaft Side Load Rating: (Load placed at end of standard shaft) Series Number Rotational Life Rotational Speed Rating Side Load Rating 90 5,000,000 + 200 rpm 0.25 lb. 92 100,000,000 + 3,000 rpm 0.25 lb. 94 100,000,000 + 3,000 rpm 5.0 lb.