OE2 Series
Specifications
Electrical Specifications
Parameter Minimum Typical Maximum Units
Vcc Range 4.5 5.5 V
Suggested Pull-Up Resistor 4.7k Ohm
Push-button Contact Resistance
(end of life)
1 Ohm
Push-button Contact Bounce 5 ms @ close / 10 ms @ open ms
Environmental Specifications
Parameter Minimum Maximum Units
Operating Temperature -40 85 C
Storage Temperature -55 105 C
Humidity: 95% R.H. per MIL-STD 202, Method 103B, Test Condition B
Mechanical Specifications
Parameter Minimum Typical Maximum Units
Rotational Life Rated with less than 8 oz.
side load applied at end of shaft
   Detented
   Non-Detented
3,000,000 rotations
10,000,000 rotations
Rotational Torque @ 20 C
   Detented
   Non-Detented

1.0
0.10



2.5
0.70

in.-oz.
in.-oz.
Push-button Life 1,000,000 Actuations
Pull-button Actuation Force
(Where Applicable)

375


625

gram
Pull-button Travel 0.035 0.020 in.
Bushing Mounting Torque 7.5 in.-lb.
Shaft Push-In Force 50 lbs.
Shaft Pull-Out Force 25 lbs.
Shock 100 (g) for 6 ms half sine wave
Vibration 15 (g) Amplitude 10-2000 (Hz) for 12 (hr)
Terminal Strength 3 lbs. (applied perpendicular to the terminals)